Chemtronics Static Free Mat and Benchtop Reconditioner ES1664T - Manual (Page 4)

Static Free™ Mat and Benchtop Reconditioner
(2-methoxymethylethoxy)propanol ACGIH TLV (United States, 3/2012). Absorbed through skin.
STEL: 909 mg/m³ 15 minutes.
STEL: 150 ppm 15 minutes.
TWA: 606 mg/m³ 8 hours.
TWA: 100 ppm 8 hours.
NIOSH REL (United States, 1/2013). Absorbed through skin.
STEL: 900 mg/m³ 15 minutes.
STEL: 150 ppm 15 minutes.
TWA: 600 mg/m³ 10 hours.
TWA: 100 ppm 10 hours.
OSHA PEL (United States, 6/2010). Absorbed through skin.
TWA: 600 mg/m³ 8 hours.
TWA: 100 ppm 8 hours.
OSHA PEL 1989 (United States, 3/1989). Absorbed through skin.
STEL: 900 mg/m³ 15 minutes.
STEL: 150 ppm 15 minutes.
TWA: 600 mg/m³ 8 hours.
TWA: 100 ppm 8 hours.
1-methoxy-2-propanol ACGIH TLV (United States, 3/2012).
STEL: 553 mg/m³ 15 minutes.
STEL: 150 ppm 15 minutes.
TWA: 369 mg/m³ 8 hours.
TWA: 100 ppm 8 hours.
NIOSH REL (United States, 1/2013).
STEL: 540 mg/m³ 15 minutes.
STEL: 150 ppm 15 minutes.
TWA: 360 mg/m³ 10 hours.
TWA: 100 ppm 10 hours.
OSHA PEL 1989 (United States, 3/1989).
STEL: 540 mg/m³ 15 minutes.
STEL: 150 ppm 15 minutes.
TWA: 360 mg/m³ 8 hours.
TWA: 100 ppm 8 hours.
8. Exposure controls/personal protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Personal protection
Respiratory :
Engineering measures : Good general ventilation should be sufficient to control worker exposure to airborne
contaminants.
Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Recommended monitoring
procedures : If this product contains ingredients with exposure limits, personal, workplace
atmosphere or biological monitoring may be required to determine the effectiveness of
the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to appropriate monitoring standards.
Reference to national guidance documents for methods for the determination of
hazardous substances will also be required.
Ingredient Exposure limits
4/9 2003L 8/16/2013.