Chemtronics Pow-R-Wash PR ES1605 - Manual

PRODUCT DESCRIPTION
Pow-R-Wash

PR is a plastics safe contact
cleaner that removes oxides and other soils
on de-energized equipment. Engineered
with very low surface tension, this high
pressure aerosol formulation flushes areas
clean and evaporates instantly leaving no
residue.
 Removes oxides, dust, dirt, and grime
from contact areas
 Penetrates hard to reach areas
 Evaporates quickly
 Leaves no residues
 Has low odor
 Noncorrosive
 Contains no CFCs, HCFCs or
1,1,1 Trichloroethane
 Contains no Chlorinated Solvents
TYPICAL APPLICATIONS
Pow-R-Wash

PR removes oxidation and
other soils from:
 Printed Circuit Boards
 Relays and Contacts
 Fuse Boxes
 Rheostats and Potentiometers
 Terminals
 Timers
 Selector Switches
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point 141
°F Initial
Dielectric Breakdown
(ASTM-D877)
44 kV
Flash Point (TCC) -20.0
°F
Appearance Clear, Colorless Liquid
Odor Mild Ethereal
Solubility in Water Negligible
Specific Gravity
(water = 1@68
°F)
0.67
Evaporation Rate < 1
(butyl acetate=1)
Surface Tension
(dynes/cm @21.6
°C)
18.3
Kauri-Butanol
(KB) Number 50
Shelflife 5 years
COMPATIBILITY
Pow-R-Wash

PR is generally compatible
with most materials used in printed circuit
board fabrication, except acrylics, ABS
resins, polycarbonates and polystyrenes. As
with any cleaning agent solvent/component
compatibility must be determined on a non-
critical area prior to use.
Material Compatibility
ABS Non-Compatible
Buna-N Fair
TDS # 1605
CHEMTRONICS
Technical Data Sheet
Pow-R-Wash

PR