Chemtronics Poly-Onyx ESD Wipes 6259BESD - Manual (Page 2)

Poly-Onyx™ Wipes Test Data
Wipe Material
Black ESD Polyester Knit Fabric
Wipe 6259BESD
Availability 9" x 9"
Basis Weight 140 g/m
2
(+/- 5 g/m
2
)
Particle Counts (LPC)
>/= 0.5 microns
6.5 million/m 2
NVR in DI water 0.045mg/g (45ppm)
NVR in IPA 0.080 mg/g (80 ppm)
FTIR : silicone, amide, phthalates None Detected
Chloride Ions 0.00002 mg/g (0.02 ppm)
Nitrite Ions 0.00012 mg/g (0.12 ppm)
Nitrate Ions 0.00012 mg/g (0.12 ppm)
Sulphate Ions 0.00040 mg/g (0.40 ppm)
Sodium Ions 0.000135 mg/g (0.135 ppm)
Calcium Ions 0.000026 mg/g (0.026ppm)
Potassium Ions 0.00051 mg/g (0.51 ppm)
Magnesium Ions 0.000016 mg/g (0.016 ppm)
Absorbency (Capacity) 337 ml/m 2
Absorbency (Rate) 0.8 seconds
Surface resistivity 1 x 10 8 – 1 x 10 10 ohm/sq
The wipe tests were done using the recommended practices of the Institute of Environmental Science, Swabs
and Wipes Working Group.
TECHNICAL HOT LINE 1-800-TECH-401
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
ITW CHEMTRONICS® does not guarantee the
accuracy of the data and assumes no liability in
connection with damages incurred while using it.
TECHNICAL AND APPLICATION
ASSISTANCE
ITW Chemtronics provides a technical hotline to answer
DISTRIBUTED BY:
your technical and application related questions.
The toll free number is:
1-800-TECH-401.
Chemtronics
® is a registered trademark of ITW Chemtronics. All rights reserved. Coventry™ and Poly Onyx™ are trademarks of
ITW Chemtronics. All rights reserved.