Chemtronics OpticWipes C920 - Manual

CHEMTRONICS
Technical Data Sheet
Opticwipes

TDS #C920
PRODUCT DESCRIPTION
Opticwipes

are 100% noncontaminating
cellulose paper. These wipers have high absorbency,
and contamination entrapment, as well as high wet
strength. Opticwipes
 are ideal for wiping
sensitive components and optical grade surfaces.
 Excellent solvent resistance
 100% cellulose
 Good abrasion resistance
 Excellent particle entrapment
 High absorbency capacity and rate
 Very low solvent extractables
 Packaged in a Class 100 environment

High wet strength
TYPICAL APPLICATIONS
Opticwipes
 can be used to:
 Clean optical surfaces, photoprocessing
equipment
 Protecting optical surfaces during
storage/shipping
 Lining cleanroom trays and work benches
 Separating silicon wafers
 Drying electronic components
 Cleaning precision lab instrumentation
COMPATIBILITY
Opticwipes
 are compatible with most common
solvents such as isopropyl alcohol, methanol. and
ketones such as acetone or methyl ethyl ketone.
These wipes are generally compatible with dilute or
weak acids.
CHEMTRONICS
8125 Cobb Center Drive
Kennesaw, GA 30152
1-770-424-4888 REV. (08/13)
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Basis Weight 17 g/m
2
Absorbency (sorptive capacity) 78 ml/m
2
NVR (IPA extractant)
NVR (DIW extractant) 0.012 gm/m 2
0.048 gm/m 2
Chloride 55 ppm
Sodium 196 ppm
Potassium 5 ppm
The tests were done using the recommended
practices of the Institute of Environmental Science,
Swabs and Wipes Working Group.
AVAILABILITY
C920
9" x 9" (10.2cm x 10.2cm)
500 wipes/bag
TECHNICAL AND APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions.
The toll free number is:
1-800-TECH-401.
Chemtronics
is a registered trademark of Chemtronics.
All rights reserved.
Opticwipes
 is a trademark of Chemtronics. All rights
reserved
DISTRIBUTED BY: