Chemtronics Optic Prep CP410 - Manual (Page 2)

Material Compatibility
Aluminum Excellent
Buna-N Good
CPVC Excellent
Epoxy Excellent
Neoprene Good
Noryl

Excellent
Phenolic Excellent
Cross-Linked PE Good
Polycarbonate Good
Polypropylene Good
Polystyrene Fair
PVC Good
Teflon

Excellent
Tygon

Good
Viton

Excellent
AVAILABILITY
CP410 50 Premoistened Wipes
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Remove wipe from packets and lightly wipe
away any dust or contaminants from surfaces.
Allow surface to dry completely before use.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics

provides a technical hotline to
answer your technical and application related
questions. Call toll free at: 1-800-TECH-
401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 65%
HCFC 0.0% HFC 0.0%
CL Solv. 0.0% ODP 0.0
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U.S. Clean Air Act of 1990. The ODP of
this product is zero.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS

does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.
Chemtronics
 is a registered trademark of Chemtronics. All
rights reserved. Optic Prep
 is a trademark of Chemtronics.
All rights reserved.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. A (08/13)
DISTRIBUTED BY: