Chemtronics MTP Connector Cleaning Swabs CC505F - Manual (Page 2)

AVAILABILITY
DIRECTIONS FOR USE
1. Lightly “spot” a QbE
®
-2 wipe on
the platen with Electro-Wash

PX
Fiber Optic Cleaner, or with the
Fiberwash
™ or MX pen.
2. Lightly touch the end of the MTO
Connector Swab to the wetted area to
absorb some cleaning solution.
Wipe connector areas to be cleaned.
3. Use another MTP Connector
Cleaning Swab to dry cleaned area,
only if required.
4. Check your work with a fiber scope
or measuring device.
NOTE: This information is believed to be
accurate. It is intended for professional
end users having the skills to evaluate and
use the data properly. Chemtronics does
not guarantee the accuracy of the data
and assumes no liability in connection
with damages incurred while using it.
TECHNICAL AND
APPLICATION ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application
related questions. The toll free number is: 1-
800-TECH-401.
Chemtronics

, and QbE® is a registered
trademark of Chemtronics. All rights
reserved. Fiberwash™ is a trademark of
Chemtronics. All rights reserved.
© 2014 Chemtronics.
All rights reserved.
Product
Number
Swabs
per
Tube
Swab
Length Head
Material Head
Width/Length Handle
Material Handle
Thickness
CC505F 25
3.25"(8.
25 cm) Synthetic
Chamois
0.09" x 0.88"
(2.3 mm x 22.3
mm)
ABS
0.09" x 0.060"
(2.3 mm x 1.6
mm )
CC5056F 25
6" (15.4
cm) Synthetic
Chamois
0.09" x 0.88"
(2.3 mm x 22.3
mm)
ABS
0.09" x 0.060"
(2.3 mm x 1.6
mm )
DISTRIBUTED BY: