Chemtronics Kontact Restorer ES1629 - Manual (Page 2)

Material Compatibility
ABS Non-Compatible
Buna-N Fair
EPDM Fair
Graphite Excellent
HDPE Excellent
LDPE Excellent
Lexan

Fair
Neoprene Fair
Nylon
 66
Excellent
Cross-Linked PE Excellent
Polypropylene Excellent
Polystyrene Non-Compatible
PVC Excellent
Silicone Rubber Poor
Teflon

Excellent
Viton

Fair
Performance
Grease Removal per gram solvent (mg)
Kontact Restorer
New & Improved!
15.4 6
HFC-based Cleaner
0.5 0.5
Grease & Lubricating Oil Removal per gram
solvent (mg)
Kontact Restorer
New & Improved!
22.5 23.
823.8
HFC-based Cleaner 0.5 0.5
USAGE INSTRUCTIONS
For commercial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to be
lubricated or protected. For precise
application use attached extension tube.
Collect run-off for proper disposal.
AVAILABILITY
ES1629
12 oz. Aerosol
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-
TECH-401
.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 87.0%
HCFC– 141b
HCFC-225 0.0%
0.0% HFC
nPB
10.0%
87.0%
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (08/13)
DISTRIBUTED BY: