beautypg.com

Handling and storage, Exposure controls/personal protection – Chemtronics Konform SR High Viscosity CTSR-HV1 User Manual

Page 4

background image

Konform® SR High Viscosity (liquid)

Store in accordance with local regulations. Store in a segregated and approved area.
Store in original container protected from direct sunlight in a dry, cool and well-ventilated
area, away from incompatible materials (see Section 10) and food and drink. Eliminate
all ignition sources. Separate from oxidizing materials. Keep container tightly closed
and sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabeled containers.
Use appropriate containment to avoid environmental contamination.

Put on appropriate personal protective equipment (see Section 8). Eating, drinking and
smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and smoking.
Remove contaminated clothing and protective equipment before entering eating areas.
Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing vapor or mist.
Use only with adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Do not enter storage areas and confined spaces unless adequately
ventilated. Keep in the original container or an approved alternative made from a
compatible material, kept tightly closed when not in use. Store and use away from heat,
sparks, open flame or any other ignition source. Use explosion-proof electrical
(ventilating, lighting and material handling) equipment. Use non-sparking tools. Take
precautionary measures against electrostatic discharges. To avoid fire or explosion,
dissipate static electricity during transfer by grounding and bonding containers and
equipment before transferring material. Empty containers retain product residue and
can be hazardous. Do not reuse container.

7. Handling and storage

Handling

Storage

:

:

toluene

ACGIH TLV (United States, 3/2012).
TWA: 20 ppm 8 hours.
NIOSH REL (United States, 1/2013).
STEL: 560 mg/m³ 15 minutes.
STEL: 150 ppm 15 minutes.
TWA: 375 mg/m³ 10 hours.
TWA: 100 ppm 10 hours.
OSHA PEL 1989 (United States, 3/1989).
STEL: 560 mg/m³ 15 minutes.
STEL: 150 ppm 15 minutes.
TWA: 375 mg/m³ 8 hours.
TWA: 100 ppm 8 hours.
OSHA PEL Z2 (United States, 11/2006).
AMP: 500 ppm 10 minutes.
CEIL: 300 ppm
TWA: 200 ppm 8 hours.

acetone

ACGIH TLV (United States, 3/2012).
STEL: 1782 mg/m³ 15 minutes.
STEL: 750 ppm 15 minutes.
TWA: 1188 mg/m³ 8 hours.
TWA: 500 ppm 8 hours.
NIOSH REL (United States, 1/2013).
TWA: 590 mg/m³ 10 hours.
TWA: 250 ppm 10 hours.
OSHA PEL (United States, 6/2010).
TWA: 2400 mg/m³ 8 hours.
TWA: 1000 ppm 8 hours.
OSHA PEL 1989 (United States, 3/1989).
STEL: 2400 mg/m³ 15 minutes.
STEL: 1000 ppm 15 minutes.
TWA: 1800 mg/m³ 8 hours.

8. Exposure controls/personal protection

Ingredient

Exposure limits

4/13

0710HVL

7/23/2013.