Chemtronics IPA Presaturated Wipes SIP91P - Manual (Page 2)

USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
IPA Presaturated Wipes:
General cleaning: Wipe surfaces thoroughly
to remove contaminants.
Stencil cleaning: Wipe away residual solder
paste until surface is thoroughly cleaned.
Repeat with a clean wipe to remove any trace
contaminants.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 91%
HCFC 0.0% HFC 0.0%
CL Solv. 0.0% ODP 0.0
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U.S. Clean Air Act of 1990. The ODP of
this product is zero.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (08/13)
DISTRIBUTED BY: