Chemtronics IPA - Isopropyl Alcohol ES820L - Manual

PRODUCT DESCRIPTION
IPA – Isopropyl Alcohol is a highly effective,
general use cleaning solvent that is used to
clean a variety of substrates and remove a
variety of soils. This 99% pure IPA is
available in a variety of sizes for all types of
use.

Low surface tension

Effective cleaning agent

Removes all types of residues, oxides, oils
and contaminants

Better than 99% pure

Evaporates quickly and leaves no residue

Safe on most plastics and elastomers

Contains no CFCs, HCFCs or ODP’s

ES105 = NSN 6810-00-286-5435
TYPICAL APPLICATIONS
IPA – Isopropyl Alcohol effectively removes
oils, dirt and dust from:
 Commercial Tape, Record/Players
 Industrial Tape, Record/Players
 Compact disk laser readers
 Electronic contacts
 Tools
 Electronic devices
 Hard surfaces
COMPATIBILITY
IPA – Isopropyl Alcohol is generally
compatible with most materials used in
electronics. As with any chemical product
used, component compatibility must be
determined on a non-critical area prior to use.
Do not use with energized equipment.
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point 180
°F
Melting Point -128 °F
Vapor Density (air=1) >1
@ 100
°F
Solubility in Water 100%
Specific Gravity
(water = 1) 0.79
Evaporation Rate <1
(Ether = 1)
Appearance Clear, Colorless Liquid
Surface Tension
(dynes/cm @25
°C)
22
Flash Point (TCC) 53
°F
Non-Volatile Residue <100 ppm
VOC* Content:
CARB 100 %
SCAQMD 790 g/L
Federal 100 %
RoHS Compliant
Kauri-Butanol (KB) Number 80
Shelflife 2 years after opening
*Volatile Organic Compound (VOC) information is calculated on a
weight basis using the VOC definition of California Air Resources
Board (CARB) Consumer Product Regulations, South Coast Air
Quality Management District (SCAQMD) Rule 102 and the Federal
definition published in 40 CFR 51.100(s).
TDS # 3205
CHEMTRONICS
Technical Data Sheet
IPA – Isopropyl Alcohol