Chemtronics Fusion Splice Prep Solvent FSP850 - Manual

PRODUCT DESCRIPTION
Fsp Fiber Optic Cleaner employs the same
proven solvent blend as Electro-Wash

PX,
which is a fast drying, one step precision
cleaning and degreasing agent safe for most
plastics. FsP (Fusion Splice Prep) is
especially configured for one-touch ease of
dispensing when servicing fusion splice
equipment or wiping cables and fiber prior to
splicing. Engineered with very low surface
tension, this high pressure aerosol
formulation evaporates quickly leaving no
residue.
 Removes encrusted dirt, grease and other
contaminants
 Especially effective at removing buffer
gel and complex soils in the splicing
environment
 Also effective on fiber end faces
 Penetrates hard to reach areas
 Evaporates quickly
 Leaves no residues
 Has low odor
 Is non-corrosive
 Contains no CFCs or HCFCs
 Contains no 1,1,1 Trichloroethane
TYPICAL APPLICATIONS
FsP cleans and degreases:
 Cable prep for fusion splice
 Use with FsW wipers for cable wiping
and fusion splice machine clean-up
 Use to dampen swabs for V-groove
cleaning and mirror cleaning
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point
141
°F Initial
Vapor Density (air=1) >1
Solubility in Water 20%
Specific Gravity 0.70
Evaporation Rate (butyl acetate=1) >1
Appearance Clear, Colorless Liquid
Odor Mild
Vapor Pressure 198 mm Hg @ 68 F (liquid)
Surface Tension 17.3 dynes/cm @21.6
°C
Flash Point (TCC) -20.0
°F
Kauri-Butanol (KB) Number 50
VOC* Content: Aerosol Liquid
CARB 74% 100 %
SCAQMD 700 g/L 690 g/L
Federal 74% 100
%
RoHS Compliant
Shelf life Aerosols 5 years
Liquids 2 years after opening
*Volatile Organic Compound (VOC) information is calculated on a
weight basis using the VOC definition of California Air Resources
Board (CARB) Consumer Product Regulations, South Coast Air
Quality Management District (SCAQMD) Rule 102 and the Federal
definition published in 40 CFR 51.100(s).
COMPATIBILITY
Electro-Wash

PX is generally compatible
with most materials used in the electronics
industry. With any cleaning agent
compatibility must be determined on a non-
critical area prior to use
CHEMTRONICS
Technical Data Sheet
FsP Fiber Optic Cleaner
TDS # FSP850