Chemtronics Freeze-It Antistatic ES1551 - Manual (Page 2)

Material Compatibility
Buna-N Fair
Graphite Good
HDPE Good
LDPE Good
Lexan

Poor
Neoprene Good
Cross-Linked PE Good
Polyacrylate Poor
Polystyrene Good
PVC Good
Silicone Rubber Fair
Teflon

Good
Viton

Poor
Competitive Assessment of Freez-It Antistat
Freez-It Antistat
56% Less 40 v/in.
Static
Competitor’s
Antistat Freeze Spray 90 v/in.
0 20 40 60 80 100 120
Static Generation (V/IN.)
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
No special surface preparation is required
prior to using Freez-It

Antistat. Direct spray
onto the area to instantly cool components,
circuit boards or adhesives. For optimum
performance and pin point control, use
Freez-It

Antistat with the attached extension
tube.
AVAILABILITY
ES1051 10 oz. Aerosol
ES1551 15 oz. Aerosol
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions.
The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 0.9%
HCFC 0.0% HFC 99.1%
CL Solv. 0.0% ODP 0.0
CFC, HCFC, CL. SOLV., VOC, and HFC numbers
shown are the content by weight. Ozone depletion
potential (ODP) is determined in accordance with the
Montreal Protocol and U.S. Clean Air Act of 1990. The
ODP of this product is 0.0. It is the sum of the ODP of
the substances that may contribute to the depletion of
stratospheric ozone, based upon the weight of each
substance in the product’s formulation.
NOTE:
This information is believed to be accurate. It is intended
for professional end users having the skills to evaluate
and use the data properly. CHEMTRONICS does not
guarantee the accuracy of the data and assumes no
liability in connection with damages incurred while using
it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. E (08/13)
DISTRIBUTED BY: