Chemtronics Freeze-It ES1550 - Manual

PRODUCT DESCRIPTION
Freez-It

is engineered for locating thermal
intermittent electrical components and cooling printed
circuit boards. This circuit refrigerant system is
nonflammable, residue-free and provides fast cooling
action.
 Nonflammable
 High heat transfer
 Low static generation
 Noncorrosive
 Lowers temperature to -60
°F (51°C)
 Ultra pure, filtered to <0.2 microns
 Leaves no residue
 Nonabrasive on most surfaces
 Contains no CFCs or HCFCs
TYPICAL APPLICATIONS
Freez-It

can be used to:
 Cool Equipment for Testing
 Dissipate Heat While Soldering or
Desoldering
 Isolate Thermal Intermittent Components
 Test Circuit Traces for Continuity
 Test Printed Circuit Boards for Stress
Fractures
 Track Intermittent Failures and Shorts
TYPICAL PRODUCT DATA AND PHYSICAL
PROPERTIES
Boiling Point -15.7
°F
Vapor Density (air=1)
@ 77
°F
3.18
Solubility in Water
@ 77
°F /1 atm
0.10% by weight
Specific Gravity
(water = 1 @77
°F)
1.21
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless
Liquified Gas
Odor Slight Ethereal
Surface Tension
(dynes/cm @ 77
°F)
7.8
Flash Point (TCC) None
Shelflife 5 years
RoHS/WEEE
Status
COMPATIBILITY
Freez-It

is generally compatible with most materials
used in printed circuit board fabrication, including
sensitive plastics and compounds. With any circuit
refrigerant, compatibility must be determined on a
non-critical area prior to use.
TDS # 1050E
CHEMTRONICS
Technical Data Sheet
Freez-It
