Physical and chemical properties, Stability and reactivity, Toxicological information – Chemtronics Flux-Off VZ ES6200 User Manual
Page 5

Flux-Off® VZ
95°C (203°F)
Liquid. [Aerosol.]
1.24
>1 [Air = 1]
29.3 kPa (220 mm Hg) [room temperature]
Characteristic.
Colorless.
Boiling/condensation point
>1 (butyl acetate = 1)
9. Physical and chemical properties
Physical state
Relative density
Vapor pressure
Vapor density
Evaporation rate
Odor
Color
:
:
:
:
:
:
:
:
Flash point
:
None.
Type of aerosol
:
Spray
Aerosol product
The product is stable.
Reactive or incompatible with the following materials:
oxidizing materials
acids
alkalis
Aluminum.
Magnesium.
zinc
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not
spray on a naked flame or any incandescent material. open flames, sparks and static
discharge Avoid increased storage temperature. elevated temperature
10. Stability and reactivity
Chemical stability
Conditions to avoid
Incompatible materials
Hazardous decomposition
products
:
:
:
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
11. Toxicological information
Acute toxicity
1,1,1,2-Tetrafluoroethane
LC50 Inhalation Vapor
Rat
1500 g/m³
4 hours
trans-dichloroethylene
LC50 Inhalation Gas.
Rat
24100 ppm
4 hours
LD50 Dermal
Rabbit
>5 g/kg
-
LD50 Oral
Rat
1235 mg/kg
-
Product/ingredient name
Result
Species
Dose
Exposure
Conclusion/Summary
:
Not available.
Chronic toxicity
Conclusion/Summary
:
Not available.
Irritation/Corrosion
Product/ingredient name
Result
Score Exposure
Observation
Conclusion/Summary
:
Not available.
Sensitizer
Conclusion/Summary
:
Not available.
Species
trans-dichloroethylene
Eyes - Moderate irritant
Rabbit
-
10 milligrams -
Skin - Moderate irritant
Rabbit
-
24 hours 500
milligrams
-
5/9
6200
7/3/2013.