Chemtronics Flux-Off VZ ES6200E - Manual (Page 2)

Material Compatibility
ABS Good
Buna-N Good
EPDM Good
Graphite Good
HDPE Good
Kynar

Good
LDPE Good
Lexan

Poor
Neoprene Good
Noryl Good
Nylon
 66
Good
Cross-Linked PE Good
Polypropylene Good
Polystyrene Poor
PVC Good
Silicone Rubber Good
Teflon

Good
Viton

Good
COMPETITIVE ASSESSMENT
Milligrams of Flux Removed
Per Gram of Solvent
6.6
5
0
1
2
3
4
5
6
7
Flux-Off VZ Competitor's HFC-based
product
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to clean.
Wash parts from top to bottom, allowing the
liquid to flush away flux residues, dirt and
dissolved oil. For precision application use
attached extension tube.
AVAILABILITY
ES6200E
Aerosol 400 ml
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-
TECH-401.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. C (08/13)
Flux-Off
 and Chemtronics are registered trademarks of
Chemtronics. All rights reserved. Verizane
, is a trademark
of Chemtronics. All rights reserved.
Vertrel® and DuPont

are trademarks or registered
trademarks of E. I. duPont de Nemours and Company.
DISTRIBUTED BY: