beautypg.com

Exposure controls/personal protection, Physical and chemical properties, Stability and reactivity – Chemtronics Flux-Off No Clean Plus ES896B User Manual

Page 7: Toxicological information

background image

Flux-Off® No Clean Plus

8. Exposure controls/personal protection

Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
When there is a risk of ignition from static electricity, wear anti-static protective clothing.
For the greatest protection from static discharges, clothing should include anti-static
overalls, boots and gloves.

Skin

:

Environmental exposure
controls

:

Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.

50°C (122°F)

Liquid. [Aerosol.]

0.71

>1 [Air = 1]

28.5 kPa (214 mm Hg) [room temperature]

Hydrocarbon. [Slight]

Clear. Colorless.

Boiling/condensation point

>1 (butyl acetate = 1)

9. Physical and chemical properties

Physical state

Relative density
Vapor pressure
Vapor density
Evaporation rate

Odor

Color

:

:
:
:
:
:
:
:

Flash point

:

Closed cup: <-18°C (<-0.4°F) [Tagliabue.]

Type of aerosol

:

Spray

Heat of combustion

:

-24.3 kJ/g

Aerosol product

The product is stable.

Reactive or incompatible with the following materials: Strong oxidizing materials Alkaline.
metals
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.

Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition. open
flames, sparks and static discharge Do not spray on a naked flame or any incandescent
material.

10. Stability and reactivity

Chemical stability

Conditions to avoid

Incompatible materials

Hazardous decomposition
products

:
:

:

:

Possibility of hazardous
reactions

:

Under normal conditions of storage and use, hazardous reactions will not occur.

11. Toxicological information

Acute toxicity

acetone

LD50 Oral

Rat

5800 mg/kg

-

methanol

LC50 Inhalation Gas.

Rat

145000 ppm

1 hours

LC50 Inhalation Gas.

Rat

64000 ppm

4 hours

LD50 Dermal

Rabbit

15800 mg/kg

-

LD50 Oral

Rat

5600 mg/kg

-

Product/ingredient name

Result

Species

Dose

Exposure

Conclusion/Summary

:

Not available.

Chronic toxicity

Conclusion/Summary

:

Not available.

7/12

ES896B, ES1696

5/15/2013.