Chemtronics Flux-Off No Clean ES195 - Manual (Page 2)

Material Compatibility
ABS Non-Compatible
Buna-N Fair
EPDM Fair
Graphite Excellent
HDPE Excellent
LDPE Good
Lexan

Fair
Neoprene Fair
Noryl

Poor
Nylon
 66
Excellent
Cross-Linked PE Excellent
Polypropylene Excellent
Polystyrene Non-Compatible
PVC Excellent
Silicone Rubber Poor
Teflon

Excellent
Viton

Fair
Performance
Flux removal per gram solvent (mg)
Flux-Off No Clean
New & Improved!
11.3 6
Competitive flux remover
7.6 .
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6” from surface to clean. Wash parts
from top to bottom, allowing the liquid to
flush away flux residue. Flux-Off

No Clean
New & Improved! may be used to remove all
types of fluxes in an ultrasonic cleaner.
AVAILABILITY
ES1695 12 oz. Aerosol
ES895B 8 oz. Brush Clean System
ES195
1 Gal. Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-
TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 41.5%
HCFC-141b
HCFC-225 0.0%
38.4%
HFC
nPB
18.0%
0.0%
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (08/13)
DISTRIBUTED BY: