Chemtronics Flux-Off Heavy Duty ES1631 - Manual (Page 2)

Material Compatibility
Buna-N Not Recommended
Graphite Good
HDPE Good
Kynar

Poor
LDPE Good
Lexan

Not Recommended
Neoprene Poor
Noryl

Poor
Cross-Linked PE Good
Polyacrylate Not Recommended
Polystyrene Not Recommended
PVC Poor
Silicone Rubber Not Recommended
Teflon

Good
Viton

Poor
COMPETITIVE ASSESSMENT
Milligrams of Rosin Flux Removed Per 3 Second Spray
200 _
_
150 _ 150.7
_
100 _
_ 58.9
50 _
_
0
Chemtronics Tech Spray
Flux-Off Flux Remover AMS
Heavy Duty
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to clean.
Wash parts from top to bottom, allowing the
liquid to flush away flux residue. For
optimum performance and pin point control,
Flux-Off

Heavy Duty should be used with
the attached extension tube.
AVAILABILITY
ES1631 12 oz. Aerosol
ES131 1 Gallon Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. D (08/13)
DISTRIBUTED BY: