Physical and chemical properties, Stability and reactivity, Toxicological information – Chemtronics Electro-Wash PX ES110 User Manual
Page 8

Electro-Wash® PX
Weighted average: 79.27°C (174.7°F)
Liquid.
Weighted average: -108.7°C (-163.7°F)
0.7
3 Air = 1
26.4 kPa (198 mm Hg) [room temperature]
Mild. Hydrocarbon.
Clear.
Boiling/condensation point
Melting/freezing point
<1
9. Physical and chemical properties
Physical state
Relative density
Vapor pressure
Vapor density
Evaporation rate
Odor
Color
:
:
:
:
:
:
:
:
:
Flash point
:
-29 C
Flammable limits
:
Lower: 1%
Upper: 7%
The product is stable.
Highly reactive or incompatible with the following materials:
oxidizing materials alkalis Alkaline.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not
allow vapor to accumulate in low or confined areas.
10. Stability and reactivity
Chemical stability
Conditions to avoid
Incompatible materials
Hazardous decomposition
products
:
:
:
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
11. Toxicological information
Acute toxicity
ethanol
LC50 Inhalation Vapor
Rat
124700 mg/m³
4 hours
LD50 Oral
Rat
7 g/kg
-
Isopropyl alcohol
LD50 Dermal
Rabbit
12800 mg/kg
-
LD50 Oral
Rat
5000 mg/kg
-
propyl acetate
LD50 Oral
Rat
9370 mg/kg
-
n-hexane
LC50 Inhalation Gas.
Rat
48000 ppm
4 hours
LD50 Oral
Rat
15840 mg/kg
-
Product/ingredient name
Result
Species
Dose
Exposure
Conclusion/Summary
:
Not available.
Chronic toxicity
Conclusion/Summary
:
Not available.
Irritation/Corrosion
8/14
0213L
8/1/2014.