Chemtronics Electro-Wash NXO ES1607 User Manual
Technical data sheet, Electro-wash ®nxo cleaner/degreaser, Chemtronics

PRODUCT DESCRIPTION
Electro Wash® NXO Cleaner/Degreaser is a non-
ozone depleting, extra strength, nonflammable
cleaner degreaser. This high pressure aerosol
cleaning agent quickly removes oxide particles, dust,
light grease and oil, then evaporates quickly, leaving
no residue.
Noncorrosive safe for metals
Nonflammable
Fast Drying
Removes oil, grease, dirt, silicone, flux, adhesive
and other contaminants.
May be used on energized equipment.
TYPICAL APPLICATIONS
Electro-Wash ®NXO Cleaner/Degreaser cleans and
degreases:
Plugs and Sockets
Potentiometers
Circuit Breakers
Solenoids
Switching Devices
Relays & Contacts
Selector Switches
Motors and Generators
COMPATIBILITY
Electro-Wash® NXO cleaner degreaser is
generally compatible with most materials used in
printed circuit board fabrication, except acrylics,
ABS Resins, Polycarbonates, Polystyrenes, and
other
resins.
With
any
cleaning
agent
compatibility must be determined on a non-
critical area prior to use.
TYPICAL PRODUCT DATA AND PHYSICAL
PROPERTIES
Boiling Point
102
F (Initial)
Flash Point (TCC)
None
Solubility in Water
@ 77
F/1 atm
5% by weight
Specific Gravity
(water = 1@ 77
F)
1.32
Evaporation Rate
(butyl acetate=1)
>1
Appearance Clear, colorless liquid
Odor
Ethereal
Surface Tension
(dynes/cm @ 25
C)
14.9
Dielectric Breakdown 15 kV
(ASTM D-877)
Kauri-Butanol 120
(KB) Number
Shelflife Aerosols 5 years
Liquids 2 years after opening
VOC* Content: Aerosol Liquid
CARB 73% 100%
SCAQMD 492 g/L 660 g/L
Federal 38%
50%
TDS # 1607
CHEMTRONICS
Technical Data Sheet
Electro-Wash ®NXO Cleaner/Degreaser