Chemtronics Electro-Wash NX ES1611 - Manual

PRODUCT DESCRIPTION
Electro-Wash

NX New & Improved!
Cleaner Degreaser is an extra strength,
nonflammable electronics cleaner and
degreaser. This high pressure aerosol
cleaning agent quickly removes oxide
particles, dust, oil and grease – evaporating
quickly without leaving residue.
 Noncorrosive safe for metals
 NSF K2 registered
 Nonflammable
 Fast drying
 Removes oil, grease, dirt, silicone, flux,
adhesive and other contaminants
 Contains no CFCs; contains HCFCs
 May be used on energized equipment
 Available with All-Way Spray valve
TYPICAL APPLICATIONS
Electro-Wash

NX New & Improved!
Cleaner Degreaser is engineered for
cleaning:
 Circuit Breakers
 Motors and Generators
 Plugs and Sockets
 Potentiometers
 Relays and Contacts
 Selector Switches
 Solenoids
 Switching Devices
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point >99
°F Initial
Evaporation Rate (butyl acetate=1) >1
Flash Point (TCC) None
Specific Gravity 1.47
Vapor Pressure @68
°F 209 mm Hg
Odor Ethereal
Solubility in Water Negligible
Kauri-Butanol (KB) Number 56
NSF-Registered K2 #135674 (aerosol)
VOC* Content: Aerosol Liquid
CARB 73% 100 %
SCAQMD 68 g/L 1108 g/L
Federal 4.6% 86
%
RoHS Compliant
Shelflife Aerosols 5 years
Liquids 2 years after opening
*Volatile Organic Compound (VOC) information is calculated on a
weight basis using the VOC definition of California Air Resources
Board (CARB) Consumer Product Regulations, South Coast Air
Quality Management District (SCAQMD) Rule 102 and the Federal
definition published in 40 CFR 51.100(s).
COMPATIBILITY
Electro-Wash

NX New & Improved!
Cleaner Degreaser is generally compatible
with most materials used in printed circuit
board fabrication, except acrylics, ABS
resins, polycarbonates and polystyrenes.
With any cleaning agent solvent/component
compatibility must be determined on a non-
critical area prior to use
TDS# 1611
CHEMTRONICS
Technical Data Sheet
Electro-Wash

NX New & Improved!
Cleaner Degreaser