Chemtronics Electro-Wash MX Presaturated Wipe CP421 - Manual (Page 4)

Electro-Wash® MX Presaturated Wipe
Store in accordance with local regulations. Store in a segregated and approved area.
Store in original container protected from direct sunlight in a dry, cool and well-ventilated
area, away from incompatible materials (see Section 10) and food and drink. Eliminate
all ignition sources. Separate from oxidizing materials. Keep container tightly closed
and sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabeled containers.
Use appropriate containment to avoid environmental contamination.
Put on appropriate personal protective equipment (see Section 8). Eating, drinking and
smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and smoking.
Remove contaminated clothing and protective equipment before entering eating areas.
Avoid exposure - obtain special instructions before use. Do not get in eyes or on skin or
clothing. Do not ingest. Avoid breathing vapor or mist. Avoid release to the
environment. Use only with adequate ventilation. Wear appropriate respirator when
ventilation is inadequate. Do not enter storage areas and confined spaces unless
adequately ventilated. Keep in the original container or an approved alternative made
from a compatible material, kept tightly closed when not in use. Store and use away
from heat, sparks, open flame or any other ignition source. Use explosion-proof
electrical (ventilating, lighting and material handling) equipment. Use non-sparking tools.
Take precautionary measures against electrostatic discharges. To avoid fire or
explosion, dissipate static electricity during transfer by grounding and bonding
containers and equipment before transferring material. Empty containers retain product
residue and can be hazardous. Do not reuse container.
7. Handling and storage
Handling
Storage
:
:
ethanol ACGIH TLV (United States, 3/2012).
STEL: 1000 ppm 15 minutes.
NIOSH REL (United States, 1/2013).
TWA: 1900 mg/m³ 10 hours.
TWA: 1000 ppm 10 hours.
OSHA PEL (United States, 6/2010).
TWA: 1900 mg/m³ 8 hours.
TWA: 1000 ppm 8 hours.
OSHA PEL 1989 (United States, 3/1989).
TWA: 1900 mg/m³ 8 hours.
TWA: 1000 ppm 8 hours.
Isopropyl alcohol ACGIH TLV (United States, 3/2012).
STEL: 400 ppm 15 minutes.
TWA: 200 ppm 8 hours.
NIOSH REL (United States, 1/2013).
STEL: 1225 mg/m³ 15 minutes.
STEL: 500 ppm 15 minutes.
TWA: 980 mg/m³ 10 hours.
TWA: 400 ppm 10 hours.
OSHA PEL (United States, 6/2010).
TWA: 980 mg/m³ 8 hours.
TWA: 400 ppm 8 hours.
OSHA PEL 1989 (United States, 3/1989).
STEL: 1225 mg/m³ 15 minutes.
STEL: 500 ppm 15 minutes.
TWA: 980 mg/m³ 8 hours.
TWA: 400 ppm 8 hours.
propyl acetate ACGIH TLV (United States, 3/2012).
STEL: 1040 mg/m³ 15 minutes.
STEL: 250 ppm 15 minutes.
8. Exposure controls/personal protection
Ingredient Exposure limits
4/11 CP421 5/9/2013.