Chemtronics Electro-Wash MX ES1621 - Manual (Page 2)

Material Compatibility
ABS
Excellent
Buna-N Excellent
EPDM Excellent
Graphite Excellent
HDPE Excellent
Kynar

Excellent
LDPE Excellent
Lexan

Excellent
Neoprene Excellent
Noryl

Excellent
Nylon 66

Excellent
Cross-Linked PE Excellent
Polypropylene Excellent
Polystyrene Excellent
PVC Excellent
Silicone Rubber Excellent
Teflon

Excellent
Viton

Excellent
USAGE INSTRUCTIONS
For commercial use only.
Read MSDS carefully prior to use.
Aerosol - Spray 4-6 inches from surface to
clean. Wash parts from top to bottom, allowing
the liquid to flush away dirt and dissolved
grease. For precise application use attached
extension tube. For controlled application,
spray into a Controlwipe
 and wipe surface
clean.
Presaturated Wipes – Remove wipe from
package and wipe surfaces thoroughly to
remove contaminants.
AVAILABILITY
ES1621 12 oz. Aerosol
CP421 Individual Presaturated Wipes
8” (20.3 cm) x 10” (25.4) , 25 per box
T021 Tub, 100 Presaturated Wipes
6” (15 cm.) x 8.5” (21.5 cm)
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application
related questions. The toll free number is:
1-800-TECH-401.
SAFETY & ENVIRONMENTAL DATA
SAFETY & ENVIRONMENTAL DATA
CFC 0.0% VOC 100%
HCFC-225 0.0% HFC 0.0%
HCFC-141b 0.0% nPB 0.0%
CFC, HCFC-225, HCFC-141b, VOC, HFC, and
nPB percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. C (08/13)
Electro-Wash
 and Chemtronics are registered trademarks
of Chemtronics. All rights reserved.
DISTRIBUTED BY: