Chemtronics Cottontips Micropoint CCT2425 User Manual
Technical data sheet, Cottontips micropoint, Chemtronics

CHEMTRONICS
Technical Data Sheet
Cottontips
MicroPoint
TECHNICAL HOT LINE 1-800-TECH-401
CCT2425
PRODUCT DESCRIPTION
The Cottontips
MicroPoint Swab consists of
cotton fibers which are tightly wrapped around a
handle. The handle of this swab is made from a
special, clean room grade composite material.
Because of the tightly wrapped head, there is very
little linting. These swabs have excellent
absorbency, as well as high strength especially
when saturated with water. This swab is designed
for cleaning applications where absorbency is
critical.
Tightly wrapped head construction
Small size for delicate precision
cleaning
Extremely low linting
High absorbency capacity and rate
Good solvent compatibility
Sharp point
Non-static generating
DIMENSIONS
(1) Total Length
A= 3.0” / 7.5 cm
(2) Cotton Length
B= 0.47” /12.0 mm
(3) Cotton Diameter C= 0.12” / 3.0 mm
(4) Cotton Clearance D= 0.02” / 0.5 mm
(5) Handle Thickness 0.06" x 0.06" /
1.5 x 1.5 mm
TYPICAL APPLICATIONS
The Cottontips
MicroPoint Swab can be used to:
Clean equipment and machinery, especially
in small crevices or openings
Remove flux residues from PCBs
Delicate parts and even some optics
Apply cleaning fluids
Absorb liquid chemical residues
Removes soils from holes, grooves and corners
where most swabs will not
COMPATIBILITY
Cottontips
MicroPoint Swabs are
compatible with all Chemtronics cleaning
solvents, and most common cleaning solvents
such as isopropyl alcohol, methanol, and
ketones such as acetone.