Chemtronics ControlWipes C910 - Manual

CHEMTRONICS
Technical Data Sheet
ControlWipes 
PRODUCT DESCRIPTION
ControlWipes
 consist of cellulose and polyester
nonwoven fabric. These wipers have excellent
absorbency, and contamination entrapment, as well
as high strength. ControlWipes
 are ideal as an
economical utility wipe for any clean area.
 Economical
 Durable
 Excellent particle entrapment
 High absorbency capacity and rate
 Low ion contamination
 Solvent and dilute acid resistant
 Low linting compared to cotton
TYPICAL APPLICATIONS
ControlWipes
 can be used to:
 Clean Water Processing Areas
 Clean-up Acids and other Chemical Spills
 Wipe Down of Machinery, and
Instrumentation
 Clean Photo-Mask Areas
 Clean Laminar Flow Benches
 Clean Quartzware
 General Purpose Wiping in Cleanrooms
COMPATIBILITY
ControlWipes
 are compatible with most
common solvents such as isopropyl alcohol,
methanol. and ketones such as acetone or methyl
ethyl ketone. These wipes are generally compatible
with dilute or weak acids.
Chemtronics
8125 Cobb Center Drive
Kennesaw, GA 30152
770-424-4888 REV. (08/13)
Chemtronics
 is registered trademark of Chemtronics.
All rights reserved.
ControlWipes
 is a trademark of Chemtronics.
All rights reserved
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Wipe Material Polyester / Cellulose
Nonwoven Fabric
Particle Count
0.5 micron or larger
(Biaxial Shake Test)
30 million/m
2
Chloride
20 ppm
Sodium
55 ppm
Potassium
5 ppm
Phosphate
None dectected
Absorbency
275 ml/m
2
Capacity
300 %
The tests were done using the recommended
practices of the Institute of Environmental Science,
Swabs and Wipes Working Group.
AVAILABILITY
C910 9 " x 9" (22.9cm x 22.9cm)
150 wipes/bag
TECHNICAL AND APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions.
The toll free number is: 1-800-TECH-401.
TDS # C910
DISTRIBUTED BY: