Chemtronics CircuitWorks® Silicone Free Heat Sink Grease CW7270 - Manual

PRODUCT DESCRIPTION
CircuitWorks

Silicone Free Heat Sink
Grease facilitates heat transfer away from
electrical/electronic components and into
heat sinks. This silicone-free compound
shows no creep or migration over a wide
temperature range. Thickened with a
proprietary thermally conductive zinc oxide
ceramic, the CircuitWorks

Silicone Free
Heat Sink Grease creates an effective heat
sink
interface in electrical/electronic
equipment.
 Exceeds MIL-C-47113 for thermal
conductivity
 Noncorrosive
 High dielectric strength
 Low migration
 Stable from -15

C to 200

C
 Nonflammable
TYPICAL APPLICATIONS
CircuitWorks

Silicone Free Heat Sink
Grease may be used for electronics
applications including:
 Effective Thermal Coupler for any
Heat Sink Device
 Nonflammable Protective Coating
 High Voltage Corona Protection
 Excellent for Improving Readings on
Contact Type Thermocouples
 Ideal
for Silicone Sensitive
Environments
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Color White
Specific Gravity @ 25

C ( 77

F) 2.4
Usable Temperature
Range 5

F (-15

C) to
392

F (200

C)
Dielectric Strength, volts/mil 500
Dielectric Constant @ 100 Hz 4.4
Dissipation Factor @ 100 Hz 0.005
Volume Resistivity, ohm-cm 1 x 10
14
Arc Resistance, seconds 120
Thermal Conductivity,
Cal-cm/sec-cm
2
-

C 1.7 x 10
-3
BTU-in/hr-ft
2
-

F 4.92
W/m

K 0.71
Shelflife 5 years
RoHS Compliant
COMPATIBILITY
CircuitWorks

Silicone Free Heat Sink
Grease is generally compatible with most
materials used in printed circuit board
fabrication.
CHEMTRONICS
Technical Data Sheet
CircuitWorks

Silicone Free Heat Sink Grease
CW7270