Chemtronics CircuitWorks® Rosin Flux Remover Pen CW9200 - Manual (Page 7)

CircuitWorks® Rosin Flux Remover Pen
11. Toxicological information
Carcinogenicity
Conclusion/Summary : Not available.
Mutagenicity
Conclusion/Summary : Not available.
Teratogenicity
Conclusion/Summary : Not available.
Reproductive toxicity
Conclusion/Summary : Not available.
Classification
Isopropyl alcohol - 3 - A4 - None.
propyl acetate - - - - - None.
1-methoxy-2-propanol - - - - - None.
Product/ingredient name ACGIH EPA NIOSH NTP IARC OSHA
Conclusion/Summary : Not available.
Sensitizer
Conclusion/Summary : Not available.
milligrams
1-methoxy-2-propanol Eyes - Mild irritant Rabbit - 24 hours 500
milligrams -
Skin - Mild irritant Rabbit - 500
milligrams -
12. Ecological information
Ecotoxicity : No known significant effects or critical hazards.
Aquatic ecotoxicity
Isopropyl alcohol Acute LC50 1400000 to 1950000 µg/l
Marine water Crustaceans - Crangon crangon 48 hours
Acute LC50 1400000 µg/l Fish - Gambusia affinis 96 hours
propyl acetate Acute LC50 60000 to 64000 µg/l Fresh
water Fish - Pimephales promelas 96 hours
Product/ingredient name Species Result Exposure
Conclusion/Summary : Not available.
Persistence/degradability
Conclusion/Summary : Not available.
Other adverse effects : No known significant effects or critical hazards.
The generation of waste should be avoided or minimized wherever possible. Disposal
of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to
the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Care should be taken when handling emptied containers that have not been
cleaned or rinsed out. Empty containers or liners may retain some product residues.
Vapor from product residues may create a highly flammable or explosive atmosphere
inside the container. Do not cut, weld or grind used containers unless they have been
cleaned thoroughly internally. Avoid dispersal of spilled material and runoff and contact Waste disposal
13. Disposal considerations
:
7/10 3113 6/27/2013.