Chemtronics CircuitWorks Overcoat Pen (Black) CW3300 User Manual
Page 2
COMPATIBILITY
The CircuitWorks
Overcoat Pen material is
generally compatible with materials used in
printed circuit board fabrication. As with
any adhesive/sealant, compatibility with
substrate should be determined on a non-
critical area prior to use.
USAGE INSTRUCTIONS
Read MSDS carefully prior to use.
Cleaning: For best adhesion, clean the
board with a Chemtronics
Electro-Wash
cleaner in order to remove any surface
contamination which may prevent adequate
material contact.
Application: The overcoat material is
dispensed throughout the CircuitWorks
Overcoat Pen. Squeezing the pen body
while pressing down on the surface will
allow the material to flow.
Thinning: The overcoat material has been
optimized for the CircuitWorks
Overcoat
Pen and thinning is not normally necessary.
However, propyl acetate may be added with
thorough mixing to make slight adjustments
for ease of application in the bulk form.
Drying: The overcoat material dries in 5 to
10 minutes at room temperature. A heat
cure of 5 - 10 minutes at 200
°F (93°C) is
recommended for more demanding
applications and for enhancing the chemical
resistance.
Clean-Up/Removal: The overcoat material
can be removed from surfaces using
acetone.
AVAILABILITY
CW3300C
4.9g / 0.16 oz. Clear
CW3300G
4.9g / 0.16 oz. Green
CW3300B
4.9g / 0.16 oz. Blue
CW3300BLACK
4.9g / 0.16 oz. Black
CW3300WHITE
4.9g / 0.16 oz. White
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions.
The toll free number is: 1-800-TECH-401.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.
Chemtronics
, CircuitWorks
and Electro-Wash
are
registered trademarks of Chemtronics. All rights reserved.
All other trademarks herein are trademarks or
registered trademarks of their respective owners.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. J (08/13)
DISTRIBUTED BY: