Chemtronics CircuitWorks® Nickel Conductive Pen CW2000 - Manual

PRODUCT DESCRIPTION
CircuitWorks

Nickel Conductive Pen
makes instant conductive traces on circuit
boards. As an economical alternative to the
CW2200 Silver Conductive Pen, this
engineered nickel coating offers good
electrical and thermal conductivity. The
Nickel Conductive Pen is used in prototype,
rework, and repair of circuit boards by
linking components, repairing defective
traces, and making smooth jumpers. The
nickel traces dry in minutes and has
excellent adhesion to most electronic
materials. Engineers, repair technicians, and
manufacturers will find that the
CircuitWorks

Nickel Conductive Pen
speeds project completion and cuts rework
time.
 Quickly creates conductive nickel traces
on most surfaces
 Easy and economical to use
 Valved pen tip for easy applications
 Dries in minutes at room temperature
 Single component system
 Good electrical and thermal conductivity
TYPICAL APPLICATIONS
CircuitWorks

Nickel Conductive Pen may
be used for electronics applications
including:
 Circuit Trace Repair
 Solderless Linking of Components
 EMI Shielding
 Quick Prototype Modifications
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Composition
Material Nickel Filled Polymer
Color Dark Gray
Setting Rate < 2mm/hr.
Properties
Conductivity 1.0 – 1.5 ohms/sq/mil
Tack-Free Time @ 25
°C 15 to 20 minutes
Full Cure Time @ 25
°C 24 hours
Electrical Conductivity Good
Adhesion Excellent
Flexibility Good
Chemical Resistance Good
Shelflife 12 months
RoHS Compliant
COMPATIBILITY
CircuitWorks

Nickel Conductive Pen
material has excellent compatibility with
materials used in printed circuit board
fabrication. As with any chemical system,
compatibility with the substrate must be
determined on a non-critical area prior to
use.
CHEMTRONICS
Technical Data Sheet
CircuitWorks

Nickel Conductive Pen
CW2000