Chemtronics CircuitWorks® Lead-Free Flux Remover Pen CW9400 - Manual (Page 2)

COMPATIBILITY
CircuitWorks

Lead-Free Flux Remover Pen
is generally compatible with most materials
used in the electronics industry. As with any
cleaning agent, material compatibility should
be determined on a non-critical area prior to
use.
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Hold pen vertically and briefly depress tip to
start liquid flow. Rub pen tip over residues
on surface to be cleaned. Wipe area clean
with a ControlWipe
 dry wipe to remove
loosened residues .
AVAILABILITY
CW9400 9 gm (0.32 oz)
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-TECH-
401.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills to
evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of the
data and assumes no liability in connection with damages
incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (08/13)
Chemtronics
 and CircuitWorks are registered trademarks of
Chemtronics. All rights reserved. ControlWipe
 is a trademark
of Chemtronics. All rights reserved.
DISTRIBUTED BY: