Chemtronics CircuitWorks® Heat Sink Grease CT40-5 User Manual

Page 2

Material Compatibility

Ceramic

Good

Clean Metals

Good

Glass

Good

Natural Fibers

Good

Silicone Resins

Good

Painted Surfaces

Good

Plastic Surfaces

Good

Synthetic Fibers

Good

Vulcanized Silicone Rubber

Good

Wood

Good

USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Contact Chemtronics for complete usage
and application instructions. When using
CircuitWorks



Heat Sink Grease, follow

these guidelines: Apply to all mounting and
threaded surfaces of the device and the
chassis. Apply by pushing product ahead of
neck.

Dispensing: CircuitWorks



Heat Sink

Grease is a ready-to-use one-component
material. Collapsible tubes may be
squeezed by hand or with the aid of
mechanical wringers.

AVAILABILITY
CT40-5 5 oz. Tube

TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics



provides a technical hotline

to answer your technical and application
related questions. The toll free number is:
1-800-TECH-401.

ENVIRONMENTAL IMPACT DATA

CFC

0.0%

VOC

0.0%

HCFC

0.0%

HFC

0.0%

Cl. Solv.

0.0%

ODP

0.00

CFC, HCFC, CL. SOLV., VOC, and HFC numbers
shown are the content by weight. Ozone depletion
potential (ODP) is determined in accordance with the
Montreal Protocol and U.S. Clean Air Act of 1990.

NOTE:

This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.

CHEMTRONICS does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.

CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888

REV. A (08/13)

Chemtronics

 and CircuitWorks are registered trademarks

DISTRIBUTED BY: