Chemtronics CircuitWorks 5 Minute Conductive Epoxy CW2400J - Manual (Page 5)

CIRCUITWORKS® CONDUCTIVE EPOXY - Part A (Epoxy)
>93.333°C (>200°F)
Solid. [Paste.]
< 0.5% (w/w)
>1 [Air = 1]
<0.13 kPa (<1 mm Hg) [room temperature]
Not dispersible in the following materials: cold water, hot water, methanol, diethyl ether,
n-octanol and acetone.
Mild. Amine-like.
Gray. [Light]
Boiling/condensation point
<1 (butyl acetate = 1)
9. Physical and chemical properties
Physical state
Vapor pressure
Vapor density
Volatility
Evaporation rate
Dispersibility properties
Odor
Color
:
:
:
:
:
:
:
:
:
Flash point : Closed cup: >93.3°C (>199.9°F) [Setaflash.]
The product is stable.
Reactive or incompatible with the following materials: oxidizing materials acids alkalis
Amines. Mercaptans.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced. Carbon dioxide, carbon monoxide, halogenated compounds, metal
oxide/oxides
Excessive Heat.
10. Stability and reactivity
Chemical stability
Conditions to avoid
Incompatible materials
Hazardous decomposition
products
:
:
:
:
Possibility of hazardous
reactions : Under normal conditions of storage and use, hazardous reactions will not occur.
11. Toxicological information
Acute toxicity
Conclusion/Summary : Not available.
Chronic toxicity
Conclusion/Summary : Not available.
Carcinogenicity
Conclusion/Summary : Not available.
Mutagenicity
Conclusion/Summary : Not available.
Classification
silver - - - - - None.
Product/ingredient name ACGIH EPA NIOSH NTP IARC OSHA
Irritation/Corrosion
Product/ingredient name Result Score Exposure Observation
Conclusion/Summary : Not available.
Sensitizer
Conclusion/Summary : Not available.
Species
reaction product: bisphenol-A-
(epichlorhydrin); epoxy resin Eyes - Mild irritant Rabbit - 100
milligrams -
Skin - Moderate irritant Rabbit - 24 hours 500
microliters -
Skin - Severe irritant Rabbit - 24 hours 2
milligrams -
5/9 4002 A 8/30/2013.