Chemtronics Chemswab CS25 - Manual (Page 2)

Material Compatibility
Aluminum Excellent
Buna-N Good
CPVC Excellent
Epoxy Excellent
Neoprene Good
Noryl

Excellent
Phenolic Excellent
Cross-Linked PE Good
Polycarbonate Poor
Polypropylene Good
Polystyrene Poor
PVC Fair
Teflon

Excellent
Tygon

Good
Viton

Excellent
USAGE INSTRUCTIONS
Read MSDS carefully prior to use.
Chemswab
TM
Presaturated Swabs:
Remove wipe from packet and lightly wipe
away any dust or contaminants from surfaces.
Allow surface to dry completely before use.
AVAILABILITY
CS25 25 Premoistened Swabs
individually packaged
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. Call toll free at: 1-800-TECH-
401 (1-800-832-4401).
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 91%
HCFC 0.0% HFC 0.0%
CL Solv. 0.0% ODP 0.0
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U.S. Clean Air Act of 1990. The ODP of
this product is zero.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. A (08/13)
Chemtronics
 is a registered trademark of Chemtronics. All
rights reserved. Chemswab
 is a trademark of Chemtronics.
All rights reserved.
DISTRIBUTED BY: