Chemtronics Chemask® LF - Lead-Free CLF8 - Manual (Page 2)

APPLICATION METHOD
Squeeze Bottle/Syringe Yes
Spatula Yes
Screening No
Automatic Dispensing Yes
Removal/Clean-up By Hand
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Chemask

Lead-Free Solder Masking Agent
is engineered for all electronic
manufacturing applications. When applying
by hand using squeeze bottle, syringe or
spatula, insure that all areas of the pretinned
hole are evenly covered on the side to be
soldered. Automatic dispensing equipment
may also be used as appropriate.
REMOVAL: After allowing the mask to
become fully cured, peelable solder mask
can be removed by hand or by the use of
tweezers. Depending on ambient conditions,
peelable mask may remain on assemblies for
extended periods of time prior to component
insertion.
AVAILABILITY
CLF8
8 oz. Squeeze Bottle
CLF1 1 Gal. / 3.7 L liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-
TECH-401.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the
skills to evaluate and use the data properly.
CHEMTRONICS does not guarantee the
accuracy of the data and assumes no liability in
connection with damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (08/13)
Chemtronics

and Chemask

are registered trademarks
of Chemtronics. All rights reserved.
DISTRIBUTED BY: