Chemtronics Chemask® HV - High Viscosity Peelable CHV8 - Manual (Page 2)

APPLICATION METHOD
Squeeze Bottle/Syringe Yes
Spatula Yes
Screening No
Automatic Dispensing Yes
Removal/Clean-up By Hand
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Chemask

HV Solder Masking Agent is
engineered for all electronic manufacturing
applications. When applying by hand using
squeeze bottle, syringe or spatula, insure that
all areas of the pretinned hole are evenly
covered on the side to be soldered.
Automatic dispensing equipment may also
be used as appropriate.
REMOVAL: After allowing the mask to
become fully cured, peelable solder mask
can be removed by hand or by the use of
tweezers. Depending on ambient conditions,
peelable mask may remain on assemblies for
extended periods of time prior to component
insertion.
AVAILABILITY
CHV8
8 oz. Squeeze Bottle
CHV1 1 Gal. Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-
TECH-401.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the
skills to evaluate and use the data properly.
CHEMTRONICS does not guarantee the
accuracy of the data and assumes no liability in
connection with damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. E (08/12)
Chemtronics

and Chemask

are registered trademarks
of Chemtronics. All rights reserved.
DISTRIBUTED BY: