NextoDI ND2730 - Manual (Page 19)

31
ADVANCED FUNCTIONS ADVANCED FUNCTIONS
32
5. Delete TMP folder
Sel Back
245.0 G
TMP Folder
FW Update
OK Cancel
245.0 G
TMP Folder
5 TMP Folders
Delete TMP?
245.0 G
TMP Folder
Deleting
/
1.00 → 1.01
FW Update
FW File Found
Update?
OK Cancel
FW Update
Updating
1.00 → 1.01
Back
FW Update
Completed
1.00 → 1.01
Back
1.00
FW Update
No valid
FW File!
If a valid firmware file is not contained in the specified
device, the ND2730 indicates an error. Check whether
the device contains valid firmware in the root directory
and repeat the previous process.
If valid firmware is found at the specified location,
the ND2730 indicates a “FW File Found” message on
the LCD. Confirm the firmware upgrade by pressing
the control key briefly [S].
The LCD screen indicates that the ND2730 firmware is
being updated. Do not turn the power off during the
firmware upgrade. Use of the AC power adapter is
recommended.
Firmware upgrade completed. The ND2730 turns off
automatically.
After turns on the ND2730, It may take more time than
usual.
Select “TMP Folder” from the main menu.
If the TMP folder exists inside the [NEXTOPS] folder,
then the number of TMP folders will appear on the LCD.
Press the control key briefly [S] to delete the TMP folders.
The LCD screen displays the message “Deleting”.