NextoDI ND2730 - Manual (Page 17)

27
ADVANCED FUNCTIONS ADVANCED FUNCTIONS
28
(2) HDD Full Test
30m 56s Off
245.0 G
HDD Full Test
0 Bad Found
Test Cancelled
30m 27s Cancel
245.0 G
0 Bad Found
OK Back
245.0 G
HDD Full Test
It will take
several hours.
Are you Ready?
Connet Power!
Sel Back
245.0 G
Self Test
Select a Method
HDD SmartTest
HDD FullTest
Select “HDD Full Test” from the [Self Test] menu.
The HDD Full Test will take several hours. So you need
to connect power to the ND2730. It will read all the
sectors in the internal hard drive to discover if any bad
sectors exist.
The HDD Full Test in progress. This process will take
about 2~3 hours.
The user can cancel the HDD Full Test by pressing the
control key for more than 2 seconds.
99m 03s Cancel
245.0 GB
12 Bad Found
HDD Change
Recommend
99m 03s Cancel
245.0 G
0 Bad Found
Full Test OK.
No errors found.
Error found during the HDD Full Test. Further use of
ND2730 may result in the loss of backup data.
Consult your authorized NEXTODI dealer for service.
Caution
● The ND2730 indicates the completion of the test using the buzzer
sound. The power does not turn off automatically at the completion
of the test.
● The ND2730 returns to the initial mode only after the user pushes
the control key for more than 2 seconds.
● It is strongly recommended that the AC adapter be connected for
this test in order to prevent battery failure during the process.