NextoDI ND2730 - Manual (Page 11)

15
USING THE ND2730 AS A HARD DISK DRIVE USING THE ND2730 AS A HARD DISK DRIVE
16
2. Connect via FireWire 800 (IEEE 1394b)
① Turn your computer on. Wait until the operating system is completely booted.
② Turn your ND2730 on.
③ Connect the ND2730 "FireWire 800 (IEEE 1394b)" slot via the FireWire 800
(IEEE 1394b) cable with a free FireWire 800 (IEEE 1394b) port on your
computer.
④ Check the "PC ↔ 1394" on the ND2730’s LCD display.
If your computer detects the ND2730 correctly, a new drive named [NEXTODI]
will appear in the “My Computer” display.
The 4pin-9pin FireWire 800 (IEEE 1394b) cable does not
provide power. Use the AC power adapter unit or USB cable
to provide power. If no power is provided, the ND2730
shows the “Connect power!” message and waits for
external power to be applied.
3. Browsing the contents of your hard drive
If your computer detects the ND2730 correctly, a new drive named [NEXTODI]
will appear on 'My Computer'.
4. Disconnecting the ND2730 from Your Computer
For Windows
Right click the Storage device icon in the System Tray (lower right corner of
your screen) and select “Safely Remove Hardware” or “Unplug” or “Eject
Hardware”. Then disconnect the cable from your ND2730 and your computer.
For MAC
Drag and drop the NEXTODI icon to the trash. Then disconnect the cable from
your ND2730 and your computer.
IEEE 1394b(FireWire 800)
IEEE 1394b
(FireWire 800)
IEEE 1394b(FireWire 800) Cable
Off
PC ↔ 1394
Off
PC ↔ 1394
Connect
Power!
File Edit View Favorites Tools Help
My Computer
내 컴퓨터
Search Folders
Local Disk (C:)
My Computer
NEXTODI (G:)
Address Go
Back
File Edit View Favorit
G:\
back
Address
Control Panel
My Document
My Computer
Local Disk (C:)
Local Disk (D:)
DVD-RAM Drive (E:)
Skylark (F:)
NEXTODI (G:)
NEXTOPS
20090601.000
DCIM
100EOS5D
479CANNON
TMP.000
TMP.001
Search
G:\
● Back up data is stored in the "NEXTOPS " folder. This
folder is created automatically. The ND2730
generates a new folder for each memory card copy.
The name of the folder is determined by the shooting
date.
● For example, 20081112.000 means the last photo
taken on November 12, 2008. (If you copy multiple
items on a single day, the last three digits will be
changed to indicate the download sequence – “000,
001,002, 003, etc.) The date code comes from the
digital cameras If the date setting on the digital
camera is incorrect, the folder name of the ND2730
will also be incorrect.
● If a copying failure occurs, the copy is stored on
your computer as a TMP folder. The TMP folder
contains the same file names, but the data may be
abnormal. You may delete the TMP folder (see
chapter 14).