Metalfab Continuous Batch Controller - Manual (Page 14)

Metalfab, Inc. 04/22/05
- 14 °©
BC623 Rate Controller Setup Steps:
1. Connect Scale to weight Indicator
2. Calibrate Scale Following Calibration Procedure
in 355 Indicator Manual
3. Connect BC623 Analog Output to Feeder Drive
Controller.
4. Connect Discrete Start / Stop Contact closures to
Feeder Drive Controller.
5. Verify Feeder Functionality using the Feeder
Test option in the Feeder Setup Menu under the
System Setup Menu
6. Perform Dynamic Calibration