Clarion AUTOPC 310C - Manual (Page 51)

Clarion AutoPC Owner’s Manual
39
You can assign station names for your Preset stations using names of
your choice. This next sequence builds upon the Preset 1 station already
established in the earlier example (ROCK = Preset 1 = 94.7 FM).
Manual ! !
Press Start, then to highlight Radio and then
Press MENU then to select Edit Preset Stations
Press and the display reads “”
Press
to select the Preset number
Press and display reads “Say Command Word three times at the tone
prompt”--press
Record the Command Word (“ROCK”) three times when prompted by
the tone (
)--wait for the “understood” beep ( ) after each repetition
Display reads: “Custom Command successfully recorded” (for 5
seconds) and then “Station name recorded”
Setting your own
station names