Clarion AUTOPC 310C - Manual (Page 3)

Clarion AutoPC Owner’s Manual
iii
Precautions continued
Care in handling
The Clarion AutoPC system is a
sensitive electronic device. As with all
electronic devices, care should be
taken to avoid contact with extreme
heat, cold, or humidity.
Operating at very cold temperatures
At extremely cold temperatures, the
display screen speed may be reduced,
and the display may dim. Also, the
colors on the display may vary
depending on the thermal condition of
the unit itself or the temperature in a
vehicle. These phenomena are the
characteristics of the liquid crystal
display and are not malfunctions.
Handling Detachable Control Panel
Also, special care should be taken
when handling and storing the
Detachable Control Panel (DCP).
Note: The terms “control panel” and
“DCP” are used interchangeably in this
document to refer to the same thing.
Fully close DCP holder after DCP
removal
It is dangerous to keep the DCP holder
at an angle once the DCP is removed.
Be sure that the DCP holder is fully
closed (in the vertical position).
Operating switches and knobs
The slanted control panel may not
maintain its adjusted angle if a button
is pushed too hard.
Cleaning display cover
Turn power off. Clean the display
cover with a lightly damp soft cloth.
Do not pour or spray liquid on the
display as this will damage the unit.