Canon FAX-TT250 User Manual
Page 41
41
7
S
ETT
INGS A
ND AC
TIVIT
Y
RE
POR
T
S
■ REPORT SETTINGS
■ TX SETTINGS
VOLUME CONTROL
Set the volume of the fax sounds.
–
KEYPAD VOLUME
Set the volume of the keypad.
0 (off)/1/2/3
ALARM VOLUME
Set the volume of the error alarm sound.
0 (off)/1/2/3
LINE MONITOR VOL
Set the volume of the line monitor (sound during dialling).
0 (off)/1/2/3
RX CALL LEVEL
Set the ring tone.
STANDARD/HIGH
TEL LINE TYPE
Set the dialling method the fax uses to match the type of phone line
you have.
TOUCH TONE/
ROTARY PULSE
R-KEY SETTING
Set the type of connection for your fax.
PSTN/PBX
PSTN
Your fax is connected to an outside line.
–
PBX
Set the access line type for the
can enter an outside line number of up to 19 digits.
PREFIX/HOOKING
Name
Description
Settings
ACTIVITY REPORT
Set the function of the activity management report.
–
TX/RX SEPARATE
Divide the activity management report into sending and receiving
transactions.
ON/OFF
Name
Description
Settings
ECM TX
Enable/disable error correction during transmission.
ON/OFF
MID PAUSE SET
Set the length of the pause you insert into a dialling sequence.
1 to 15 seconds*
AUTO REDIAL
Determine whether the fax will redial a number if it fails to get a
response on the first attempt.
ON/OFF
REDIAL TIMES
Set the number of retries.
1 to 10 times*
REDIAL INTERVAL
Set the period of time between redialling attempts.
2 to 60 minutes*
*
Differs depending on the country.
Name
Description
Settings
07.fm Page 41 Tuesday, September 28, 2004 10:58 AM