Canon FAX-TT250 - Manual (Page 37)

37
6
RE
CEIV
ING DOC
U
ME
NTS
Setting the receive mode
Receiving both documents and telephone calls
automatically:
If you set mode, you can control precisely how the fax handles incoming calls by adjusting the following
settings:
• Adjust the time the fax takes to check whether a call is from a fax machine or a telephone (
setting).
• Adjust the length of time the fax rings when the call is a voice call ( setting).
• Set whether the fax switches to receive mode after the ring time set in has elapsed
( setting).
1 Press [Receive Mode], then press [Stop] to return to standby mode.
Every time you press [Receive Mode], the mode changes cyclically.
1 Press [Function], then press [Start/Copy].
2 Use [ ] or [ ] to select , then press [Start/Copy].
3 Use [ ] or [ ] to select , then press [Start/Copy] twice.
4 Use the numeric buttons to enter the time the fax waits before ringing when
it receives a call, then press [Start/Copy] twice.
5 Use the numeric buttons to enter the time the fax rings while waiting for
someone to pick up the handset, then press [Start/Copy] twice.
6 Use [ ] or [ ] to select or , then press [Start/Copy].
This setting tells the fax what to do if the handset is not picked up within the specified ring time set in step 5.
7 Press [Stop].
Setting ends and the fax returns to standby mode.
8SEC
22SEC
DISCONNECT
Thalia.book Page 37 Tuesday, September 28, 2004 10:13 AM