Tools and equipment required, Safety, Safety warnings – Cisco 10720 User Manual
Page 3
3
Tools and Equipment Required
78-13101-02
Tools and Equipment Required
The cable-management system consists of the following components:
•
cable-management tray for managing cables
•
cable-management cover to keep the cables from being accidentally stressed
Caution
Excessive bending in an interface cable can degrade performance.
You must power down your router before maintaining any field replaceable unit (FRU) module.
Tools and Equipment Required
You will need the following tools and equipment to install and remove the cable-management system
and to mount the router:
•
ESD-preventive wrist strap
•
Number 1 Phillips screwdriver
•
Antistatic bag (optional)
•
ESD-preventive wrist strap
•
cable ties
Safety
This publication contains important safety information that you must read and understand before
attempting to install, remove, or modify any hardware in your router. For more safety information, see
the
“Electromagnetic Compliance” section on page 20
and the
“Translated Safety Warnings” section on
For information about regulatory compliance and safety, see the Regulatory Compliance and Safety
Information for the Cisco 10720 Internet Router publication that shipped with your router.
Please review the safety guidelines in the following sections to avoid injuring yourself or damaging the
equipment:
•
•
Safety Warnings
Before mounting the router or installing the cable-management system, read the following safety
guidelines:
Caution
This router is equipped with a redundant power supply. Ensure both power supply connections are
disconnected before beginning any procedure.
Warning
Read the installation instructions before you connect the system to its power source.