Welch Allyn PartnerConnect Software - Installation Guide - Manual (Page 12)

Server name IP address
Required
ports Optional
ports
Location
gas-de1.axeda.com 62.209.44.17 443, 17002 80, 17001 Frankfurt
gas-hk3.axeda.com 120.136.45.13 443, 17002 80, 17001 Hong Kong
gas-aus.axeda.com 122.202.65.179 443, 17002 80, 17001 Sydney
gas-sj4.axeda.com 204.42.142.84 443, 17002 80, 17001 San Jose
gas-bo4.axeda.com 209.202.167.141 443, 17002 80, 17001 Waltham
gas-bo5.axeda.com 209.202.167.142 443, 17002 80, 17001 Waltham
gas-bo6.axeda.com 209.202.186.30 443, 17002 80, 17001 Waltham
Note If you need IP addresses, contact your IT network person to resolve the DNS names
to an IP address, based on your current and local settings.
For additional diagnostic information, go to the following URL:
https://welchallynsolutions.com/drm/actions/sitepreputility/show
After logging in, this screen appears:
TCP/UDP ports used
The following table lists the port assignments used by the Welch Allyn PartnerConnect solution.
After installation, you can use this information to configure the firewalls, virus software, and router
access lists for your facility.
8 Troubleshooting PartnerConnect® software