Welch Allyn Connex Vital Signs Monitor Calibration/Verification Module Notes - Quick Reference Guide - Manual (Page 5)

Species Code Definition /
Description
Original / Alert
type
Traditional code
map
Details Host
controller
action
6 19 Host controller
alert
Internal error None None
6 20 Host controller
alert
Internal error None None
6 21 Host controller
alert
Internal error None None
6 24 Host controller
alert
Internal error None Request
appropriate
CIT.
NIBP reading status codes
Code Definition /
Description
Origin / Alert
type
Traditional code
map
Display message to
operator
Host controller
action
0 No error. Not applicable. Not applicable. Not applicable. Display the
reading.
1 Reading aborted. Operator alert. C01 Blood pressure reading
cancelled by user.
Return cancelled
cycle confirmation
to operator.
2 NIBP reading not
available.
Host controller
alert.
Internal error. None Host controller to
resign attempt to
gather reading.
3 Reading may be
inaccurate.
Patient alert. Not applicable. Message displayed
depends on host
environment. Message
could be result of a
reading error, or could be
the reading accompanied
by a splat (*).
Make the error
clearable, and
allow another
cycle to be run.
4 Excessive artifact,
no BP parameters
could be calculated.
Patient alert. C05 / C06 Unable to determine
blood pressure. Check
connections; restrict
patient movement.
Make the error
clearable, and
allow another
cycle to be run.
5 Low inflation. Patient alert. C05 Unable to determine
blood pressure. Check
connections; restrict
patient movement.
Make the error
clearable, and
allow another
cycle to be run.
6 Kinked tube
detected or there is a
transducer
calibration failure.
Equipment
alert.
Internal error. Internal NIBP error.
Contact Welch Allyn
Technical Service.
Power down.
7 Dump too soon. Patient alert. C05 Unable to determine
blood pressure. Check
connections; restrict
patient movement.
Make the error
clearable, and
allow another
cycle to be run.