Welch Allyn Multi-Operatory Air Abrasion Accessory - User Manual - Manual (Page 8)

990229 REV C 8
Product Safety Labeling
Recycling Instructions
Device:
•
All covers and housings should be recycled as steel or aluminum.
•
Plastic parts should be removed from the metal pads before recycling (e.g.,
power inlet, footswitch connector, main switch, etc.)
•
All printed circuit boards should be recycled as electronic devices.
Accessories:
•
All spare parts should be recycled according to the instructions above.
•
Products that have been in contact with the patient should be cleaned and
sterilized.
Packaging:
•
The carton, all other plastics, and inserts should be recycled (cardboard, foam,
polyethylene).
ALL RECYCLING MUST BE IN COMPLIANCE WITH THE RELEVANT
NATIONAL LAWS. GOVERNMENT AUTHORIZED RECYCLING CENTERS
MUST BE USED.
ENVIRONMENTALLY RELEVANT MATERIALS:
Type B equipment (defines the degree of protection against electrical
shock)
Refer to Operator’s Manual
Alternating Current (AC)