Welch Allyn Multi-Operatory Air Abrasion Accessory - User Manual - Manual (Page 3)

990229 REV C 3
1. Introduction and General Information
Introduction
The Kreativ Multi-Operatory Air Abrasion Accessory is an accessory extending the
use of the Mach 5.0 and the Mach 5.0 Plus (Mach 5/5+) family of air abrasion
systems into two dental operatories separated by distances of up to 32 feet, while
maintaining the remote control capabilities of the Mach 5/5+ system in both
operatories. Simultaneous operation in both operatories is not supported.
Every attempt has been made to make this manual a comprehensive overview of the
Kreativ Multi-Operatory Accessory. It is very important that you read this
manual thoroughly before you attempt to set up or use the equipment.
Purpose of this Manual
This manual should be thoroughly studied before installing and using the equipment.
Please call your nearest authorized Welch Allyn / Kreativ service representative if you
need additional information regarding installation, operation, or service of the
instrument.
Chapter One provides an overview of the system, and covers the use of the manual,
features of the Multi-Operatory Accessory, specifications, and other general
information.
Chapter Two is a listing of all product Warnings and Cautions. Warnings relate to
issues that could be harmful to either the user or the patient, while Cautions cover
issues that could unnecessarily damage the equipment. Please pay special attention
to this chapter.
Chapter Three covers the initial unpacking, set-up, and operational verification of the
unit. This section should also be referred to whenever the unit is moved from one
location to another or stored for extended periods of time.
Chapter
1