Welch Allyn ELSV-24 Hi-Lux Light Source - User Manual - Manual (Page 3)

Thank you for purchasing the ELSV-24 Hi-Lux Light Source. This product was
manufactured for Everest VIT Inc. by Welch Allyn Inc., our parent company and
technology leader in the design and manufacture of advanced technology
lighting products.
By following the use and care instructions in this guide, you will be rewarded with
years of dependable, trouble-free service. Please read these instructions completely
before use.
TABLE OF CONTENTS
System Symbol Definitions ........p.1
Warnings and Precautions ........p.1
System Description ................p.2
System Set-up and Operation ....p.3
User Maintenance ..................p.6
Lamp Replacement
......................
Fuse Replacement
......................
Cleaning ................................
Troubleshooting Guide ............p.9
Technical Specifications ........p.10
Accessories ........................p.10
Agency Compliance Statements ..p.11
Warranty and Service ............p.12
How to Contact Us ................back
AGENCY COMPLIANCE STATEMENTS
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Class A Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case the user will be required to
correct the interference at his own expense.
Caution: Any changes or modifications made to this device that are not expressly approved by Everest
VIT may void the user’s authority to operate the equipment.
Note: To maintain compliance with FCC Rules and Regulations, cables connected to this device must be
shielded cables, in which the cable shield wire(s) have been grounded (tied) to the connector shell.
Canadian Notice
This equipment does not exceed the Class A limits for radio noise emissions as described in the Radio
Interference Regulations of the Canadian Department of Communications.
Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites applicables
aux apparelis numeriques de la classe A prescrites dans le Reglement sur le brouillage radioelectique
edicte par le ministere des Communications du Canada.
p.11