Welch Allyn LumiView Portable Binocular Microscope - User Manual - Manual (Page 17)

Connecting Instrument to Portable Power Source:
l
Plug instrument power Portable Power Source
cord into the power cord
connector port on top of the
power source.
l
Push in until firmly in place.
l
Gently screw the external
connector sleeve clockwise
to secure (optional).
Recharging the Portable Power Source:
l
Turn portable power source off.
l
Disconnect instrument from
power source. On/Off
l
Plug charging transformer into
portable power source.
l
Plug charging transformer into
wall socket. LED light indicates
unit is charging.
l
Disconnect charging
transformer from power source
when fully charged, after
10-12 hours.
Accessing Spare Lamp
l
Lift the spare lamp out of
its receptacle and use.
15